PHS Double Sided Tape is a double-sided, ready-to-use polyacrylate adhesive film.
PHS Double Sided Tape, used for bonding VCL membranes to the substrate i.e. studs and rafters. It allows for greater airtightness over the alternative of puncturing the membrane with staples and the only option when bonding to steel substrates.
Furthermore – the ageing resistance of PHS Double Sided Tape is very high. Perfect solution for the self-adhesive equipping and coating of rolled material. Especially when you require high adhesion and bonding onto difficult substrates. PHS Double Sided Tape has a width of up to 50mm. This complies to the requirements according to DIN 18324: Fire safety of large roofs for buildings.
Backing: Silicone paper
Total thickness: 0.25 mm (without release liner)
Release liner: silicone paper, blue-white
Type of adhesive: polyacrylate adhesive
Adhesion (DIN EN 1939)*: > 25 N / 25 mm
Tack: very high
Shear strength: Medium
Temperature range: -30C to +100C
Application temperature: -10C to +40C, recommended > +5C
Roll widths: 30mm
Roll length (standard): 50m
Storage: in dry rooms from +5C to +25C
PHS Double Sided Tape is used for bonding VCL membranes to the substrate i.e. studs, joists and rafters. This allows for greater airtightness over the alternative of puncturing the membrane with staples and the only option when bonding to steel substrates.
Ensure that the PHS Double Sided Tape is applied within the temperature range, between -10C and +40C, preferably above 5C.
Apply thePHS Double Sided Tape in the centre and length of the application area (stud, joist etc) Peel away the silicone paper backing when ready to adhere the membrane to thePHS Double Sided Tape. Firmly apply the membrane to thePHS Double Sided Tape with a cloth or a roller.
Size: 35mmX50m 100mmX50m
Box quantity: 20 –
Status: Stock item Special order