logo1

PHS Sd Variable Membrane

PHS Sd Variable Membrane is a multi-layered vapour barrier with a moisture-variable sd value. It’s used indoors to create an airtight barrier and a vapour control layer for the protection of the construction according to DIN 4108.

 

Datasheet

Application Instructions

Declaration of performance

Description

PHS Sd Variable Membrane is a multi-layered vapour barrier with a moisture-variable sd value. It’s used indoors to create an airtight barrier and a vapour control layer for the protection of the construction according to DIN 4108.

PHS Sd Variable Membrane is a reliable airtight and vapour control layer. During the winter it reliably prevents diffusion of interior humidity into the roof and wall construction. As a result – during summer it allows for back fusion from the insulation as well as the wall and roof construction. It also prevents condensation that facilitates mildew growth and constructional damages.

Material

  • Composite of a functional PA film and PP non-woven,
  • Outstanding ageing resistance,
  • UV resistant: at least 18 months behind glass and three months in outdoor exposure*.

Color

  • White with print.

Special features

  • Fulfills the requirements of the EnEV as a moisture-variable vapour barrier,
  • Especially useful for new buildings as well as for renovation of old buildings,
  • The CE sign according to DIN EN 13984 provides the necessary security for the application in constructions to build according to all valid requirements of the EnEV and construction standards.
0/5 (0 Reviews)

Technical Details

Grammage (DIN EN 1849-2):  85 g/m² (± 5g/m²)
Maximum tensile strength (DIN EN 13859-1)
     Lengthwise: 150 N / 50 mm
     Crosswise: 125 N / 50 mm
Elongation at maximum tensile strength (DIN EN 13859- 1)
     Lengthwise:    >200%
     Crosswise:  >225%
Resistance to tear propagation (nail shaft; DIN EN 13859-1)
     Lengthwise: >25 N
     Crosswise:   >25 N
Temperature range:  -40C to +80C 0.25 < sd < 5.0; moisture-variable** 2.02 m***
Resistance to tear propagation (nail shaft; DIN EN 13859-1)
     Lengthwise:  >25 N
     Crosswise:  >25 N
Temperature range:   -40C to +80C 0.25 < sd < 5.0; moisture-variable** 2.02 m***
Fire performance (DIN EN 13501-1): class E, corresponds to B2 according to DIN 4102
Water resistance:  passed
CE certificate: passed

* Relating to being installed in German standard climatic conditions; not in mountain regions

** In case of calculations according to DIN 4108-3 (Glaser method) use the static sd value only.

0/5 (0 Reviews)

Application

Store in dry rooms from +5C to +25C, protected from UV-radiation.
The membrane should be applied perpendicular to the direction of the application surface i.e. studs, rafters and joists.
The membrane should be fixed with staples every 150mm or double-sided tape.
PHS Argo Joint Tape or a suitable grommet should be used for penetrations.
For bonding barrier overlaps, penetrations and repair spots, PHS Argo Joint Tape or a similar tape is recommended.
For connections to concrete or masonry PHS Ottello Adhesive Sealant is recommended.
Ensure there is a 100mm overlap of the membranes and tape with PHS Argo Joint Tape or another suitable tape.

0/5 (0 Reviews)

Sizes

Part Number: Sizes: Box Quantities: Barcode:
AR9093   1.5mx40m   1 05391536370145

0/5 (0 Reviews)

Bestsellers