PHS Loft Stairs Insulation Kit

Airtight, Thermal Insulating, Vapour Control Barrier

Eliminate drafts, reduce heat lost through your attic stairs and improve energy efficiency with this 3-in-1 insulation kit with heavy duty insulation, vapour control and double radiant barrier to help retain heat in your home.

Features

Premium Quality
Cost Effective
Technical Support
Installation Guides

Did you know that a home can loose 25% of its heat through the roof ?

Even when your loft is insulated, if your loft stairs isn’t, then you could be loosing heat upwards. Poor airtightness sealing around loft hatches can result in the ‘chimney effect’ where warm air is drawn up into an unheated loft space. The PHS Loft Stairs Insulation Kit combines high thermal insulation with airtightness technology to dramatically reduce heat loss through your loft stairs, sealing the area and making your home more energy efficient.

BS EN 13984:2013

Features & Benefits

Double Radiant Fabric
Airtight Vapour Control Layer
Heavy Duty Insulation
Flexible & Lightweight
Durable Zippers
Easy to install
Range of Sizes
Triple Layer Wall: 340 g/m2
Thermal Conductivity (ASTM C518-21): 0.037 W/(m.K)
Thermal Resistance: 0.161 (m².K/W)

Colour	Silver
Size	1080mm x 510mm x 280mm, 1140mm x 550mm x 280mm, 1190mm x 590mm x 280mm, 1380mm x 650mm x 280mm
Mass Per Unit Area	340g/m²
Water Vapour Resistance - Sd Value	>1000m
Thermal Conductivity	0.037 W (m.K) (ASTM C518-21)
Thermal Resistance	0.58W /m2K
Tensile Strength Longitudinal	358 N/50mm -0/+20%
Tensile Strength Transverse	359 N/50mm -0/+20%
Elongation Longitudinal	31%
Elongation Transverse	33%
Tear Resistance Longitudinal	199 N
Tear Resistance Transverse	192 N
Water Penetration Resistance	No Penetration /2Kpa
Resistance to Fire	Class E
Material	Aluminium Bubble Foil Insulation
Location	Internal
System	Retrofit

Installation

Installation Guide:

Stapling: Install the attic opening insulation cover by stapling through the black band to the rough framed opening (usually 2×6’s) above the 1×4 stair frame.
Orientation: Locating the zipper opening closer to the attic stair hinge will allow for easier attic access.
Air Sealing: Apply a bead of foam sealant or caulk between the Cover’s walls and the wood framing from the attic side to ensure a good air tight seal.
Larger Voids: Use our single component foam sealant to insulate attic stairs by sealing larger gaps and voids between Hatchway™ attic access door insulation and framing members.

SKU

SKU:	Size:	Sell Qty:	Barcode:
AR9053	1190 x 590 x 280 mm	1	05391536370664
AR9053A	1140 x 550 x 280 mm	1	05391536370718
AR9053B	1080 x 510 x 280 mm	1	05391536370725
AR9053C	1380 x 650 x 280 mm	1	05391536370770