Description
PHS Foam Gun + Cleaner Kit Includes: PHS Foam Gun + PHS Foam Cleaner
PHS FOAM CLEANER
PHS Foam Cleaner is an organic solvent blend designed to remove fresh polyurethane foam and is specifically formulated to clean the gun adapter after use.
Application Areas
Cleans uncured foam from surfaces, clothes, window & door frames and prevents foam cure in the gun adapter and aerosol valves.
Instructions
•Before screwing the cleaner onto the gun connector, attach the plastic tube included.
•Shake well and screw the aerosol tightly onto the gun adapter.
•Press the trigger to flush the cleaner through the gun with several short shots for at least 5 seconds.
•Rest for 15 minutes to allow cleaner to work.
•Then flush the gun once more.
•Unscrew and wipe the threads clean.
•Clean the gun adapter if you haven’t used it in over a week.
Application
Operating Instructions
The PHS Foam Gun is for use with PHS Airtight Foam but may also be used with other brands of expanding foam. Wear protective glasses and gloves when using these products.
Using the PHS Foam Gun with PHS Airtight Foam:
- Make sure the Release Valve is turned to the OFF position. [image of off required]
- Shake the PU aerosol and prepare the area as directed on the aerosol can, then screw securely onto the threaded Inlet. [image or ref no required]
- Set the flow volume using the Regulator Dial [ref no required]. Turn clockwise to reduce flow and anti-clockwise to increase flow.
- For detailed work, attach a plastic nib to the ribbed Nozzle [ref no required].
- When ready to spray, turn the Release Valve to the ON position. [image of on required]
- Slowly press down on the Trigger to apply the spray foam [ref no required].
- When finished spraying, turn the Release Valve to the OFF position, and turn the Regulator Dial all the way clockwise.
- The aerosol can now be unscrewed from the Inlet. The aerosol valve and foam gun should be cleaned immediately to prevent foam curing.
Cleaning the PHS Foam Gun
- Using PHS Foam Cleaner, shake can as directed, then unclip the flat cap, detach the Cleaner Nozzle from its gate and secure onto the Cleaner Aerosol Valve. [image required]
- Scrape away excess uncured foam where possible, then spray PHS Foam Cleaner on the exterior of the foam gun, aerosol can, clothes and other surfaces, and wipe clean with a lint free cloth. CAUTION: May damage plastic and other sensitive surfaces.
- Next, clean the interior of the foam gun. Remove the Cleaner Nozzle and clip into its seat.
