Description
Combi Offer Includes: PHS Airtight Foam x5, PHS Foam Cleaner x1, PHS Teflon Gun x1 and FREE PHS Protective Eyewear.
PHS AIRTIGHT FOAM
PHS Airtight Foam is formulated to create an airtight, thermal and sound insulating interface between construction components.
Properties
•Adheres to all common building materials, with the exception of polyethylene, silicone, oils and greases, mould release agents, etc.
•Processed at temperatures from +5°C to +30°C.
•Hardened foam is elastic, predominantly closed-cell, rot-proof, moisture-proof, temperature-resistant from -50°C to +100°C.
•Resistant to aging, but not to UV radiation.
•Offers excellent thermal and sound insulation values.
Processing
•The adhesive surfaces must be free of dirt, dust and grease.
•Slightly moisten the building connection joint with a water spray.
•The optimal processing temperature is +20° C to +25°C.
•Shake the can thoroughly before use.
•Fill the joint no more than halfway, because the fresh foam expands to 2-3 times the initial volume.
•Foam layers thicker than 5cm in several steps and allow each layer to harden.
•The foam cures more effectively and quickly when additional moisture is present in the substrates.
•Moistening is recommended for all joints after applying each layer of foam.
•Insufficient supply of moisture or excessive moisture can lead to unwanted shrinkage of the foam.
•Never press the partially hardened foam into the joint.
•Remove fresh foam stains immediately with foam cleaner. Only during the tack-free period is this possible. Only a specialised cleaner or a machine can remove hardened foam.
PHS FOAM CLEANER
PHS Foam Cleaner is an organic solvent blend designed to remove fresh polyurethane foam and is specifically formulated to clean the gun adapter after use.
Application Areas
Cleans uncured foam from surfaces, clothes, window & door frames and prevents foam cure in the gun adapter and aerosol valves.
Instructions
•Before screwing the cleaner onto the gun connector, attach the plastic tube included.
•Shake well and screw the aerosol tightly onto the gun adapter.
•Press the trigger to flush the cleaner through the gun with several short shots for at least 5 seconds.
•Rest for 15 minutes to allow cleaner to work.
•Then flush the gun once more.
•Unscrew and wipe the threads clean.
•Clean the gun adapter if you haven’t used it in over a week.
