PHS 50/50 Split Release Tape

Description

PHS 50/50 Split Release Tape (100mm wide) is a pliable stretchable PE-film sealing tape.

PHS 50/50 Split Release Tape is used indoors for the airtightness bonding and sealing of the floor to wall junction. It is moisture-resistant polyacrylate adhesive of extremely high tack and permanent adhesion as well as outstanding ageing resistance. Surfaces must be stable, dry, free of grease and dust, and must not contain adhesive-repellent coatings, some MDF and masonry surface may need a primer coating (such as Paint Primer 6300) for best results. The installer should firstly apply a sample of the tape and test adhesion.

Advantages

  • The split release permits the installer to quickly apply the tape in separate and manageable steps.
  • 50mm strip facilitates the speedy and accurate fixing of the tape to window frame.
  • PET reinforcement helps preventing over expansion of the adhesive tape.

Technical Details


Backing:                                                          
 Polyethylene film, UV stabilized with PET-filament reinforcement  
Roll Length:                                                     
25m
Total Thickness (DIN EN 1942)*:                
 0.34 mm (without release liner)  
Tensile Strength (DIN EN 14410)*:             
 >50N/25mm  
Elongation at break (DIN EN 14410)*:        
150% – 200%  
Release Liner:                                                 
Silicone paper  
Types of adhesive:                                          
Polyacrylate adhesive  
Adhesion (DIN EN 1939)*:                            
>30N/25mm  
Tack:                                                                
Very high  
Shear strength:                                               
Medium  
Moisture resistance (GPM 812):                  
 Permanent Resistance  
Temperature range:                                      
 -40 C to +80 C  
Application Temperature:                             
-10 C to +40 C , recommended at >+5 C

Application


The PHS 50/50 tape is used indoors for the airtight bonding and sealing of the floor to wall junction.

Surfaces must be stable, dry, free of grease and dust, and must not contain adhesive-repellent coatings, some MDF and masonry surface may need a primer coating (such as Primer 6300) for best results.

The installer should firstly apply a sample of the tape and test adhesion.

Fitting Instruction

  • Cut the required length of tape; fold the tape along the split line.
  • The 50mm release liner strip is removed and the tape is applied to the floor.
  • Removes the remaining liner and fit remaining tape to the wall.
  • Ensure there is sufficient stress relief on the tape, this prevent pulling on the tape and possible damage.

Sizes


Size: 
                 50/50

Box Quantity:     6